Metal oxide

Comment

Author: Admin | 2025-04-28

What are Metal Oxide Film Resistors?Metal-oxide film resistors are fixed value, axial resistors. They are made of ceramic rod that is coated with a thin film of metal oxides, such as tin oxide. Metal oxide film resistors must not be confused with metal oxide varistors, made of zinc oxide or silicon carbide.PropertiesMetal oxide film resistors exceed the performance of metal film and carbon film resistors for the following properties: power rating, voltage rating, overload capabilities, surge capacity, and high temperature operation. Designers often choose the metal oxide film resistor for high endurance applications. Stability properties are inferior to metal film resistors. The metal oxide film resistors have poor properties for low values and tolerance. The temperature coefficient is around 300 ppm/°C, which is higher than for metal film types.The resistance material for metal oxide resistors is tin oxide that is contaminated with antimony oxide to increase the resistivity. Metal oxide resistors can withstand higher temperatures than carbon or metal film resistors. The noise properties are similar to carbon resistors. Maximum operating temperature comparison Material Carbon film Metal film Metal oxide Temperature 200 °C / 390 °F 250-300 °C / 480-570 °F 450 °C / 840 °F ApplicationsMany properties of metal oxide film resistors are similar to metal film resistors. For basic use, metal film and metal oxide film are currently the predominant resistor types. Compared to carbon film, the prices are just as low. For applications where the power dissipation requirements are above 1 W and reasonable stability is required, carbon film resistors are more cost efficient than metal oxide film resistors.ManufacturingThe metal oxide film is most often produced using chemical deposition methods. Almost always a ceramic carrier is used as substrate. The deposition process involves the reaction of a pure metal with a gas at high temperature and at a low pressure. A very common metal oxide film is tin oxide. The film is established by heating the resistor body in a tin chloride vapor.Other metal oxide films usually employ a different deposition process. First, a thin metal film is applied. This film is then reacted with oxygen. The

Add Comment